8.27.2007

Cold Smoking: Weber mod, v 2.0

cold smoker


In my previous version of the Weber mod, I was essentially cooking, not smoking since my dome temperature was 150-deg-F. Since then I made the several changes. I'll point out all the features of the new version and indicate which are alterations to the old one.

1. Dome, no change here. Just a thermometer inserted to monitor the temperature near the food.

2. The Thunderbelly insert (caution: most horribly designed site in the world with loud music), used, as before, to position food further from the heat/smoke source.

3. The drilled out bottom to permit the smoke into the Weber kettle, no change.

4. The 6" to 4" ductpipe reducer. Perfect to fit an inverted 28 oz. can of tomatoes (empty, 6 in 1 brand). This is a big change. I drilled about 6 3/8" holes in the bottom of the can. This permits less smoke to go through the can as my previous much larger aperature. I believe this slows down the combustion of the wood resulting in:
a. reduction of billowing clouds of mesquite smoke all over the neighborhood,
b. my neighbors' comfort because they don't have to smell the billowing clouds of smoke all day,
c. our clothes and home won't smell of mesquite all day from the billowing clouds of smoke and,
d. the smoldering wood will last much longer (a ca. 2.5" cube smoldered about 6 hours).

5. Using my chimney/smoke conduit on top of a cast iron pan greatly reduced the dome temperature. The cast iron pan got really hot, but since the heat is essentially outside the system, it dissipates into the environment much better than the previous version. On a 80-deg-F day with no wind, I was able to keep the dome temperature at a steady 105-deg-F to 110-deg-F. Still on the high end of cold smoking, but on a cooler day, with a light breeze, this may be perfect for a 24 hour period of smoking, perfect for salmon or trout.

6. 650 W hotplate set on M, no change.

This was just a dry run with no food in the chamber. I have a couple more ideas to implement before a food run. Keep you posted.

No comments:

Post a Comment